1. product introduction
Titanium alloy soot blower diaphragm is mainly used in dust blowing device for dust removal in power plant, and other sonic soot blower needed for dust removal device.
Technical requirements: surface smooth, smooth, around the car light, thickness and diameter tolerance can be customized.
Surface treatment process: acid washing, spray brush and light cutting.
MOQ: 20-30
2. product specifications
Thickness: 1.4/1.5/1.6/1.8/2.0mm
Diameter: 150-240mm
These are commonly used specifications, can be customized according to the requirements of the requirements of the specifications, and can also be processed according to the drawings.
3. material
TC4 or other required materials
4. performance standards
The chemical composition accords with the standards of GB/T 3621-2007, GB/T 2965-2007, GB/T 3625-2007 and so on.
5. standard value
Product label |
|
Product name |
Diaphragm |
Size range |
δ1.5-2.0×Φ149-250 material TC4 GR5 TA2 |
Standard of execution |
GB/T 3621-2007 |
Product advantage |
Smooth and no burr around, fine surface treatment, high smoothness, good sound wave effect, good elasticity and no cracking, long service life. |
Technical advantage |
Special process, high level of flatness, sound sound effect and sound sound |
Reference standard for chemical composition |
Grade |
Al |
V |
N≤ |
C≤ |
H≤ |
Fe≤ |
O≤ |
Other elements (single) |
Other elements (sum) |
TA1 |
|
|
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
0.1 |
0.40 |
TA2 |
|
|
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
0.1 |
0.40 |
TC4 |
5.5-6.75 |
3.5-4.5 |
0.05 |
0.08 |
0.015 |
0.30 |
0.20 |
0.1 |
0.40 |
Reference standard for mechanical properties |
Grade |
The mechanical properties at room temperature are not less than |
Tensile strength |
Yield strength |
Elongation |
Section shrinkage rate |
TA1 |
170 MPa |
240 MPa |
25% |
30% |
TA2 |
275 MPa |
345 MPa |
20% |
30% |
TC4 |
825 MPa |
895 MPa |
10% |
20% |