1. product introduction
Our titanium rods are mainly made up of two kinds of pure titanium rods and alloy rods. They are mainly used for processing titanium screws, processing parts / standard parts, medical devices (human implants), titanium target blocks and so on.
2. product specifications
Diameter 2mm-300mm
Fast diameter 100mm*40/45mm of coating target
Or diameter 60mm*35/40mm
100mm/200mm extruding tube
These are commonly used specifications, and the specific specifications can also be made according to the requirements of the customers.
3. material
TA1 (Grade 1), TA2 (Grade 2)
TA9 (Grade 7), TA10 (Grade 12), TA18
TC4 (Grade 5), TC6, TC11
4. performance standards
The chemical composition accords with the standard of GB/T 2965-2007.
5. Standard value
Reference standard for chemical composition |
Grade |
Al |
V |
N≤ |
C≤ |
H≤ |
Fe≤ |
O≤ |
Other elements (single) |
Other elements (sum) |
TA1 |
|
|
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
0.1 |
0.40 |
TA2 |
|
|
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
0.1 |
0.40 |
TC4 |
5.5-6.75 |
3.5-4.5 |
0.05 |
0.08 |
0.015 |
0.30 |
0.20 |
0.1 |
0.40 |
Reference standard for mechanical properties |
Grade |
The mechanical properties at room temperature are not less than |
Tensile strength |
Yield strength |
Elongation |
Section shrinkage rate |
TA1 |
170 MPa |
240 MPa |
25% |
30% |
TA2 |
275 MPa |
345 MPa |
20% |
30% |
TC4 |
825 MPa |
895 MPa |
10% |
20% |