1. product introduction
Titanium plate production of our pure titanium plate and alloy two plate, titanium plate is mainly used for processing, watchband buckle, plate heat exchanger tube, titanium mesh, electric dust collector cathode line / corona line (oil tank), plating tank, titanium clad steel plate, large equipment (titanium heat exchanger reactor, reactor), titanium target, tube plate / blind plate and flange etc.. Titanium alloy plate, mainly TC4 plate, is mainly used to process various kinds of cutting tools, and the sonic soot blower diaphragm is used for dust removal in power plant.
2. product specifications
Thickness range: 0.5mm-200mm
Titanium roll / titanium tape: 0.1mm-0.5mm thick *1m/1.2m/1.5m wide.
Standard: 0.5mm-20mm thick *1m*2m.
Cold rolled sheet: 1mm-4mm*1m*2m
Hot rolled sheet: 4mm thick or above
Wide plate: *2m*6m above 5mm
These are commonly used specifications, and the specific specifications can also be made according to the requirements of the customers.
3. material
TA1 (Grade 1), TA2 (Grade 2)
TA9 (Grade 7), TA10 (Grade 12), TA18
TC4 (Grade 5), TC6, TC11
4. performance standards
The chemical composition accords with the standard of GB/T 3625-2007.
5. Standard value
Reference standard for chemical composition |
Grade |
Al |
V |
N≤ |
C≤ |
H≤ |
Fe≤ |
O≤ |
Other elements (single) |
Other elements (sum) |
TA1 |
|
|
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
0.1 |
0.40 |
TA2 |
|
|
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
0.1 |
0.40 |
TC4 |
5.5-6.75 |
3.5-4.5 |
0.05 |
0.08 |
0.015 |
0.30 |
0.20 |
0.1 |
0.40 |
Reference standard for mechanical properties |
Grade |
The mechanical properties at room temperature are not less than |
Tensile strength |
Yield strength |
Elongation |
Section shrinkage rate |
TA1 |
170 MPa |
240 MPa |
25% |
30% |