1. product introduction
Ultrasonic cutter for rubber mixing machine output: such as cutting, cutting, cutting meat, candy, chocolate, printed circuit board, industry, jewelry industry, plastic products processing, food processing, printing industry, automobile industry (natural fiber segmentation can be divided into fine lines), synthetic fiber (deep multilayer circuit cut off), plastic processing, thin artificial resins including paint etc.. It can also be expanded, such as digging holes, shovel digging, scraping lacquers, carving, dividing lines, and so on.
2. product specifications
The ultrasonic cutting tool is divided into two kinds: flat die and knife die.
The general size is 40mm (thick), 14mm (high), and 150/200/220 (long).
Any size can be customized according to customer's requirements or custom-made according to the customer's drawings.
3. material
TC4 (Grade 5) (Ti-6Al-4V) or other
4. performance standards
The chemical composition accords with the standards of GB/T 3621-2007, GB/T 2965-2007, GB/T 3625-2007 and so on.
5. standard value
| Product label |
|
| Product name |
Cutters and vibrant heads TC4 GR5 GR23 |
| Size range |
Height 120 thickness 40 width 95-200 or customized according to customer's drawings |
| Standard of execution |
GB/T3621 GB/T2965 |
| Product advantage |
The product has good toughness, high plasticity, high strength, no crack in use, surface polishing and good finish. |
| Technical advantage |
The military technology is forged, the metallographic organization is uniform, the knife edge is sharp within A5 and the straightness is good. |
| Reference standard for chemical composition |
Grade |
Al |
V |
N≤ |
C≤ |
H≤ |
Fe≤ |
O≤ |
Other elements (single) |
Other elements (sum) |
TA1 |
|
|
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
0.1 |
0.40 |
TA2 |
|
|
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
0.1 |
0.40 |
TC4 |
5.5-6.75 |
3.5-4.5 |
0.05 |
0.08 |
0.015 |
0.30 |
0.20 |
0.1 |
0.40 |
Reference standard for mechanical properties |
| Grade |
The mechanical properties at room temperature are not less than |
Tensile strength |
Yield strength |
Elongation |
Section shrinkage rate |
TA1 |
170 MPa |
240 MPa |
25% |
30% |
| TA2 |
275 MPa |
345 MPa |
20% |
30% |
| TC4 |
825 MPa |
895 MPa |
10% |
20% |
WeChat